Télécharger Imprimer la page

PowerGistics Grab&Go 1F20USB Guide D'installation page 4

Publicité

WARNINGS
Please read the warnings below for important safety information regarding your product.
Failure to read these warnings or to follow the instructions below could result in personal
injury or damage to your product that could void its warranty.
• DO NOT PLUG POWERGISTICS TOWERS INTO OTHER TOWERS.
MUST BE PLUGGED DIRECTLY INTO THE WALL OUTLET.
• WALL MOUNTED TOWER MUST HAVE THE BASE RESTING
ON THE FLOOR.
• SHELF WEIGHT RATING: 5 LBS PER SHELF.
4
In its unassembled state, small
parts present a hazard.
Ensure that any cables
extending across the floor
to your product are properly
bundled and marked to avoid
tripping or falling which may
lead to personal injury.
This product is intended for
indoor use only. To reduce the
risk of fire or electric shock,
do not expose this product to
rain or moisture. The internal
components are not sealed
from the environment.
Read your power strip's
electrical specifications.
Only plug in to devices that
are approved for use with
this power strip. Connect the
supplied power strip directly
to a wall outlet. The socket-
outlet shall be installed near
the equipment and shall be
easily accessible. Do not
connect to another power
strip or use an extension cord.
Unplug when not in use.
WARNINGS
Must be assembled by an
adult.
Do not install or use the
electrical components
of this unit during a
lightning storm.
Do not climb on, hang
from or suspend objects
from any components
of your product unless
otherwise specified.
Read the electrical
specifications of any
electronic equipment
you are using with your
PowerGistics products.
Failure to read these
specifications and
follow their instructions
could result in damage
to your equipment or
personal injury.

Publicité

loading

Produits Connexes pour PowerGistics Grab&Go 1F20USB