Page 1
• To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
Page 2
MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
Page 3
RP41574L 2578 Series/Series/Seria Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP40267L Lift Rod Barra de Alzar Tige de Manoeuvre RP24097 1/4 Turn Stop RP6060 Parada (Tope) a un 1/4 de Rotación Bonnet Nuts Butée 1/4 de Tour Bonetes/Capuchones Chapeaux Filetés RP4993...
Page 4
RP26533L (2578-LHP Only / Sólo / Seulement) Metal Pop-Up Assembly Less Lift Rod Ensamble de Metal del Desagüe Automático Menos la Barra de Alzar Renvoi Mécanique en Métal Sans la Tige de Manoeuvre RP5648L Stopper Tapón RP12516 Bonde Strap & Screw Barra Chata y Tornillo Feuillard et Vis RP23060L...
Page 5
1/2" (13 mm) Make connections to water lines. Use 1/2" IPS Position faucet (1) and gasket (2) on sink. Hand Install handles (1). faucet connections (A), or use the supplied cou- tighten nuts (3). Option: If sink is uneven, use pling nuts (LHP and LHPTP Only) (1) with 3/8"...
Page 6
Metal Pop-up Apply silicone to underside of flange (1). Insert body Remove pivot nut (1). Install horizontal rod (2) and Remove stopper (1) and flange (2). (2) into sink. Screw flange (1) into body (2). stopper (3) as removable (4) or non-removable (5). Screw nut (1) all the way down.
Page 7
Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull pop-up Remove pivot nut (1). Install horizontal rod (2) Remove stopper (1), brass nut & washer (2), black gasket (3) and tail piece (4). straight down into drain hole and secure and stopper (3) as removable (4) or gasket (2), brass nut and washer (3).
Page 8
Plastic Pop-Up Remove stopper (1) and flange (2). Screw nut Remove pivot nut (1). Install horizontal rod Remove aerator (1) and turn faucet handles (2) all the way (3) all the way down. Push gasket (4) down. (2) and stopper (3) as removable (4) or on.