nimble CHAMP 2 Serie Mode D'emploi page 2

nimble Champ Portable Chargers
LED Charge Indicator:
Click Power Button once. Up to 4 white LEDs will illuminate to
show charging status and current battery level.
Note: A green LED indicates Power Delivery (PD) or Quick
Charge (QC) mode when charging a compatible device or
recharging the Champ battery.
Turn Charger On & Start Charging:
Connect your device to begin charging automatically. One
click will wake up the battery and start charging if Champ is
in sleep mode.
Turn Charger Off & Stop Charging:
Stop charging by disconnecting your device or double click
the Power Button to enter sleep mode. Champ will enter sleep
mode automatically after the device is fully charged or
disconnected for 30~40sec. Champ will also enter sleep
mode if a cable is connected but no chargeable device
is detected.
Recharging the Champ Battery:
Connect the included cable to a power source like a Nimble
USB Wall Charger and then insert the Type-C connector into
the battery's USB-C port. From 0%, Champ will take 2-4 hours
to recharge. You can recharge the Champ battery using the
USB-C Input while charging a device via USB-C Output.
Trickle Charge Mode:
Press and hold Power Button for 3 seconds to start Trickle
Charging. Ideal for small devices like wearables and
wireless headphones.