Télécharger Imprimer la page

Sansui SE-7 Mode D'emploi page 14

Publicité

Operating procedures
1. Depress the POWER switch and turn on the power.
-
2. Depress the EQUALIZER
"ON" switch.
Ps
3. When
listening to a disk or broadcast, select the source with the
amplifier's function selector and operate the turntable or tuner. De-
press the TAPE MONITOR
"SOURCE" switch and the TAPE COPY
"SOURCE" switch.
When
listening to a tape, depress the TAPE
MONITOR
''TAPE-1"
or "TAPE-2"
switch
in accordance
with
the connections
of the
tape deck being used.
4. Set the amplifier's tape monitor
switch
to the ''tape'' position.
Rotate the OUTPUT
LEVEL controls to the right so as to minimize
the volume difference during the switchover.
5. Adjust the sound volume with the volume control on the amplifier.
6. Use the equalizer controls to adjust the sound quality of the repro-
duced source to your preference.
*
If the EQUALIZER
"DEFEAT"
switch is depressed, you will be
able to hear the sound before compensation.
EQUALIZER
[
|
PA
ee,
DEFEAT
ON RECORDING
K|>0
e
OO0s
EQUALIZER
ee
fo
DEFEAT
ON RECORDING

Publicité

loading