DURAVIT Qatego QA 7082 Notice De Montage page 6

1
110 V
NOTICE
A 110 V GFCI outlet is required.
> Mark the holes to be drilled
for the anchors.
5
> Confirm that all screws
are securely attached.
9
2
1
> Line up the top screws
with the inserts on the
back of the mirror.
> Push mirror onto the wall
until screws are inserted
securely.
2
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Check leveling of the top
two screws.
10
5
> 7
"
> 3
> Make sure there is
clearance of minimum
3" between mirror and
washbasin.
3
2x 8
> The plastic anchors
provided are for concrete
wall applications.
7
> Adjust leveling if required.
4
2x 6,5x61
> Thred the two mounting
screws into the top two
anchors.
8
1
2
3
> Plug the mirror into the
outlet.
> Remove the foil from
the Velcro fastener and
carefully press the mirror
firmly against the wall to
secure it.
11
MAL_Qatego_QA7082/23.03.1
6