Maytag MLI7500AAW Mode D'emploi page 4

CONTROLS
Steam Button
• Leave button up for steam, press
down for a dry iron.
Burst of Steam Button
• Pressing this button will
discharge a powerful shot
of steam.
Temperature Indicator Lights
• The selected light will continue
flashing until the preset
temperature is reached.
• Once the preset temperature is
reached, the light will stop
flashing and remain illuminated.
• If the iron is not on the cradle,
these lights will not be
illuminated.
Off/Auto Off Light
The "OFF / AUTO OFF" light will
flash when:
• The electrical plug is inserted into
the electrical outlet.
• The temperature is set to "OFF".
• The auto-shutoff function is
activated.
• If the iron is left on the cradle with the power still on, it will automatically shut off after
approximately 10 minutes. The "Auto off" light will illuminate.
3
Temperature Control Button
Press this button firmly, once the iron
has been placed on the cradle.
• Each time this button is pressed, the
flashing light will cycle to the next
temperature indicator, in the order
shown by the arrows in the diagram.
• In order to avoid a malfunction
caused by accidental button contact,
the iron has been designed so that
the activation of the temperature
control button requires additional
pressure.
Get other manuals https://www.bkmanuals.com
Spray Button
• Pressing this button will
discharge a mist of water from
the spray nozzle.
Ready Light
• This light will illuminate when the
appropriate operating
temperature is reached.
• During ironing, the ready light will
begin to flash whenever the
temperature of the iron starts to
decrease. If the temperature
continues to decrease, the light
will eventually turn off. When the
light begins to flash, place the
iron back on the cradle for
reheating. Once the soleplate
heats up to the appropriate
operating temperature, the light
will again illuminate.
2
1 3
4