Safety information
Power related
WARNING
f Please prevent any risk of electric shock or
fire.
– Do not damage the power cord.
– Do not pull the power cord too hard or touch
the power plug with wet hands.
– Do not use a power source other than 100-
240 V~ and also do not use a multi outlet to
supply power to number of devices at the same
time. (Do not leave the cord carelessly on the
floor.)
– Do not use a damaged power plug, power cord
or loose power outlet.
f Clean dust or any foreign matters on the pin
and contact part of the power plug.
– There is a risk of electric shock or malfunction.
Before use
WARNING
f Do not use POWERbot near combustible
materials.
– Place near candle, desktop lamps, fireplace or
near combustible materials such as gasoline,
alcohol, thinners etc.
f The POWERbot is intended for household
use therefore do not use it in an attic,
basement, storage, industrial building, out of
indoor space, places with moisture (such as
bathroom, laundry), on the table or shelves.
– The POWERbot can be damaged or
malfunction.
f Be sure POWERbot does not pass through or
touch any kind of liquids.
– The POWERbot can be severely damaged and
it may contaminate other areas if the wheels
pass through liquid.
f Do not spill any liquids on the docking station.
– There is a risk of fire or electric shock.
All manuals and user guides at all-guides.com
f Do not use the docking station for anything
f Always keep the cliff sensor clean for your
f If any abnormal sounds, smells or smoke
f When power cord is damaged, contact a
f Please check with a Samsung Electronics
ENGLISH-08
other than its intended purpose.
– There is a risk of fire or severe damage to the
docking station.
safety.
In use
WARNING
come from POWERbot, immediately shut
off the emergency switch at the bottom of
POWERbot and contact a service center.
Cleaning and
WARNING
maintenance
service center to get it replaced by certified
repairman.
– There is a risk of fire or electric shock.
service center when exchanging batteries.
– Using batteries from other products can cause
malfunction.