König Electronic CMP-SATAPCI11 Mode D'emploi page 3

Requirement
There are four requirements for achieving the performance of the Ultra ATA-133.
1. The device must support Ultra ATA-133 mode.
2. The motherboard and system BIOS or add-on IDE controller card must support
Ultra ATA-133 mode.
3. The operating system must support Direct Memory Access (DMA) such as Microsoft
Windows XP, Windows 2000, Windows NT, Windows ME, Windows 98SE/98 and
Windows95B(OSR2).
4. The IDE cable must be ATA-133(80-wires/40-pin) and the length of the cable should
not exceed 18 inches (44 cm).
The performance of the Ultra ATA-133 can only be achieved, when all the above
requirements are met.
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC 's-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: info@nedis.com
Declare that product:
Brand: König Electronic
Model: CMP-SATAPCI11
Description: S-ATA PCI card + IDE connection
Is in conformity with the following standards
EMC EN 55022: 1998+A1:2000+A2:2003
EN 55024: 1998+A1:2001+A2:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
And complies with the requirements of the European Union Directives. 2004/108/EC
's-Hertogenbosch, 01 May 2009
Mrs. J. Gilad
Purchase Director
All manuals and user guides at all-guides.com
3