Publicité
Les langues disponibles
Les langues disponibles
105–250 V/AC Phase tester
Item no. 2108751
This voltage tester is designed to test voltages of
105–250 V/AC, 50 Hz. The specified voltages on
the voltage tester are nominal voltages.
This product must only be used by a qualified
electrician!
The voltage tester must only be used for the spe‑
cified voltage / in the specified voltage range. The
accuracy of the readings is only guaranteed at
temperatures of ‑10 °C to +50 °C and frequencies
of 50 to 500 Hz. The visibility of the display may be
affected in poor lighting conditions (e.g. sunlight),
unfavourable locations (e.g. wooden step ladders
or insulating flooring) and in AC voltage networks
that are not grounded. Check that the voltage tes‑
ter is functioning correctly before each use. The
voltage tester must not be exposed to precipitation
(e.g. rain or dew) during use. Voltage testers with a
screwdriver blade should only be used to measure
voltages and must not be used for other tasks on
live parts. The voltage tester has the GS mark.
Defective voltage testers whose function and/
or safety is evidently impaired must not be used.
Dimensions .......................145 x 25 x 22 mm
Weight ..............................35 g
Electronic devices are recyclable waste and must
not be placed in household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
Publicité
