HUANUO HNMUA4 Instructions page 3

STEP 2 Parts Assembly
Peel off the protect paper of the soft pads [F], then attach them to the
STEP 2.1
monitor clips [E]
Secure the monitor clips [E] to bracket assembly
STEP 2.2
STEP 3 Secure Bracket Assembly onto Monitor Plate(Not Included)
K
K
E
Note:
Select appropriate number
of spacers [B] to fit the
thickness of the monitor.
If monitor plate comes with 2
gourd-shaped holes, you need to
use the 2 extra washers [K] as
shown in the figure.
[Not Included]
Warning:
Ensure bolts are secured firmly.
2
Warning:
Ensure bolts are
secured firmly.
Alternate Spacer Setups