Bestherm FT-30MJ3 Manuel D'instructions page 14

the Base Locking Screw to finish attaching the Base to the fan
body.
5. Now turn it right way up and place on a flat stable surface
Fan Head Assembly
Neck Fixing Bolt and Knob--to fix the Motor unit to the Pipe
Locating Screw-- to limit the angle of tilt
Tilt Adjustment Screw--to adjust the tilt
1. Remove the Tilt Adjustment Screw from the neck of the Motor
Unit; place the neck over the Pipe with Locating Screw aligning
with the slot on the side of the Pipe.
2. Run the Neck Fixing Bolt through the neck of the Motor Unit and
the Pipe.
Tighten the Locating Screw.
5