Publicité
ENG Manual LED PANEL Bright PLB
Dimensions:
Electrical connection:
Always use the led panel in combination with an Integratech LED driver!
Non dimmable
200~240Vac
Dimmable 1-10V/DALI
1-10V current draw < 2mA.
Installation and maintenance should always be done by qualified personnel. The light source contained in this luminaire shall only be replaced
by the manufacturer or his service agent or a similar qualified person. Damaged devices in original packaging are exchanged under guarantee.
The grounding must be correctly connected at all times to prevent safety problems. Always check whether the correct connection voltage is
present.
LED driver not included, please ensure that the Class III LED panel light shall be supplied with independent SELV LED driver.
Use driver with constant output current (max. output voltage 59VDC), 750mA (30W) or 900mA (36W).
Used lamps
Always return old or defective LED fixtures to an appropriate collection point in accordance with the applicable regulations regarding
environmental protection. Used lamps can be deposited at a recycling point where they are accepted for free. Proper use of equipment makes
it possible to preserve valuable environmental resources and prevent negative consequences for health and the environment.
Integratech bvba – Groenstraat 48 – BE3270 Scherpenheuvel - Belgium
Mounting accessories
Recessed frame
60x60
QTRF6060W
30x120
QTRF30120W
TRIAC dimmable
Drivers compatible with led panel Bright
Reference
Dimmable
QTD30W5
no
QTD36W5
QTD36W1-10
TRIAC/1-10V/DALI
Push function is only suitable for the operation of
one LED panel!
Protection degree: IP40
Operating temperature: -20~+40°C
Frame color: white RAL9016
Order the driver separately for each panel.
P
I
30W
750mA
36W
900mA
Publicité
