HIGHSIDER GOMA-RS Mode D'emploi page 3

Thank you for buying a HIGHSIDER product. Because of our passion for motorcycles all our products are designed to meet your needs as a motorcyclist. We wish you always a safe and pleasant ride with your new HIGHSIDER product
from Paaschburg & Wunderlich GmbH.
Only when professionally installed is the statutory warranty and driving safety fulfilled. Pay attention to the information in the operating instructions of the vehicle or specifications of the vehicle manufacturer. Failure to follow the
assembly instructions can damage your vehicle and void the warranty. This is necessary to not affect the riding safety. No liability is accepted for consequential damage.
The unauthorized reworking and / or modification of the product can lead to the failure of the function and is not permitted. No entry in the vehicle documents or the carrying of any documents is necessary.
Please keep these instructions for later use!
Scope of delivery:
 1 Pair of rubber grips
Installation of the handlebar grips:
1. Before the installation, make sure that your vehicle is standing safe. Before the installation, check the appropriate outer diameter of the handlebars or the inner diameter of the grips with a calliper.
2. Dismantle any existing handlebar ends and, if necessary, instruments to prevent scratching during the assembly.
3. The old handlebar grips are removed as follows:
3.1 Use a screwdriver to lift up the end of the grip and squirt some detergent solution under the grips. Alternatively, brake cleaner can be used for rubber grips (rubber grip only). If you no longer want to use the old grips, you
can cut them open with a knife. It is essential to ensure that the rotary gas sleeve is not damaged, as it is usually made of thin plastic.
3.2 Carefully slide the grip off the handlebars.
4. It is easiest to assemble with the grips warmed up. Soak the grips in a lukewarm water / detergent solution for a few minutes. CAUTION: Since the detergent solution is evaporating very slowly, the full grip of the grips on the
handlebars is reached after 24 hours at the earliest. Alternatively, brake cleaner can be used to make it easier to slide the grips onto the handlebars. The turned aluminium parts remain on the grip during the installation (Fig.2)!
5. Note the different inside diameters of the grips (Fig.1).
6. Fit any previously removed instruments or handlebar ends.
7. CAUTION: It is essential to check that the grips on the handlebars and the throttle sleeve are securely attached! The throttle tube can be rotated freely and must immediately and independently return to the idle position when the
grip is released. Neither the instruments nor the handlebar ends slow down the rotation of the grip!
8. CAUTION: A jammed throttle affects driving safety!
Find useful additional accessories like stem extensions, resistors, electronic relays, adapter cables and other equipment in our Webshop!
Fig. 1
Before each ride: It is the duty and responsibility of the rider to regularly check and maintain the safety-related vehicle parts. Before starting your journey, check the correct adjustment and function of the HIGHSIDER products and the tightness of all screwed connections.
Warranty: Take the time to do a 100% professional job of installing the HIGHSIDER products. Take into account all our installation and safety instructions.
A faulty, improper installation or handling of the product will void the warranty.
Maintenance/Care: Do not use aggressive detergents to care for the HIGHSIDER products. The HIGHSIDER products can be perfectly cleaned with a simple, lukewarm detergent solution. Contact with brake fluid, brake cleaner, fuel, etc. should be avoided. Immediately pick
up any unintentionally applied impurities with a soft cloth and clean the surface with detergent solution
Enviromental Information: This product may not be disposed in the normal household rubbish at the end of its lifetime. The disposal can be done through the Paaschburg u. Wunderlich customer service or a local return and waste collection institution.
HIGHSIDER Tips & Tricks on
https://www.youtube.com/c/HIGHSIDERTippsTricks
Exclusion of liability and warranty regulation:
In the event of improper handling, installation or use of the device, warranty and guarantee claims may expire. Due to the non-verifiability of the correct application, Paaschburg und Wunderlich GmbH assumes no liability for direct or indirect damage or consequential damage resulting from the operation of the device.
This does not apply if the damage is based on intent or gross negligence on the part of Paaschburg & Wunderlich GmbH, or if the damage consists in injury to life, limb or health, or Paaschburg & Wunderlich GmbH has culpably violated an essential contractual obligation (cardinal obligation).
Paaschburg & Wunderlich GmbH, Am Alten Lokschuppen 10a, D-21509 Glinde (GER),
Tel.: +49 (0) 40 248 277-0; E-Mail: sales@pwonline.de
315-062A_Rev00_2022-01
Mounting
HIGHSIDER GOMA-RS handlebar grip for handlebar diameter 7/8in (22,2mm)
Please read this manual carefully prior to installation
Fig. 2
: You can find more
www.highsider-germany.de
and safety instructions
A = Ø 32 mm
B = 125 mm
products at:
A
B
Image similar
www.highsider-germany.de
All rights reserved. Changes and errors are excepted.
Seite 3 von 5