Control Panel; Timer On/Off; Cool/ Dry/ Fan - Kenwood KW 85 Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB/KW85
17-11-2003
All functions of the unit can be controlled from the control panel or the remote control unit (certain models only).

TIMER ON/OFF

button
Press this button to
activate the timer
function (turns the
appliance
off
if
already on and vice
versa).
TIMER HOUR button
Press this button to
set the length of
time
before
the
appliance goes off
(with
the
unit on) or comes
on (with the
unit off).
displays the opera-
ting mode

COOL/ DRY/ FAN

Air conditioning
Dehumidifying
Ventilating
19:21
Pagina 5

Control panel

SET TEMP buttons
These buttons can
be used to set the
Press this button to
required room tem-
distribute the air flow
perature in a range
between
17°C
evenly throughout
(62°F)
and
31°C
the room (swing) or
(87°F). The tempera-
in a specific direc-
ture set is increased
tion (fixed position).
or reduced by 1°C
(33°F).
Standby button
When the indica-
tor light is on, the
appliance is plug-
ged into the outlet.
FAN SPEED button
SWING button
Press this button to
set the speed of the
air flow emitted:
Max (HIGH), Med
(MED), Min (LOW).
Tank full
When on, indica-
tes that the tank
needs emptying
F
Indicates that the
keypad is locked
MODE KEY
Press this button to
select the various
operating modes:
air
conditioning
(COOL),
dehumi-
difying (DRY) or ven-
tilating (FAN).
ON/OFF button
Press this button to
turn the air conditio-
ning unit on or off.
Infrared receiver
(only on some
models)
displays the position
of the air distribution
fins
5

Publicité

Table des Matières
loading

Table des Matières