Publicité
INSTALLATION INSTRUCTION
WS-W241310-CS
Fig.1
Fixture
PREPARATION
MOUNTING THE FIXTURE (Fig. 1)
Secure the mounting back plate to the junction box using the screws(D) provided.
N OTE
N
CONNECTING THE WIRES
has a green or bare copper ground wire, connect the fixture's ground wire to it. Otherwise, connect the fixture's ground wire directly to the
back plate using the
COMPLETING THE INSTALLATION
To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. indoor/outdoor silicone sealant) to outline the
The lamp can switch between three color temperatures (2700K-3000K-3500K-4000K-5000K), which can be adjusted to your preference
with the switch in the back plate (Fig.5).
Fig. Wiring
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
waclighting.com
Headquarters/Eastern Distribution Center
Phone (800) 526.2588
44 Harbor Park Drive
Fax
(800) 526.2585
Port Washington, NY 11050
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
Ground Wire
Wire Connector
Mounting Back Plate
Junction Box Screw
screw provided. After wires are connected, tuck them carefully inside the junction box.
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
South East Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Mounting Hole Dimensions
Junction Box
Fig.
Junction Box
Caulking
Central Manufacturing Facility
1700 South J Elmer Freeway
Suite 100
Cedar Hill, TX 75104
3
3
1
1
8 "
4 "
Fig. 5
5000K 4000K
3500K
3000K
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91761
Dec 2023
2700K
120V
2
Publicité
