Southern Enterprises LT1968 Assemblage page 5

English
Note! Installation by a certified electrician is recommended.
•
Find your main fuse or breaker box in your home.
•
Turn off and/or unscrew all fuses.
•
Turn off all circuit breaker switches that control
power to the room in which you are working.
•
Turn any wall switches off. If any pull chains or switches
are on the fixture, turn off.
Note! Do not damage any wire insulation during installation.
Note! Ensure no rough or sharp edges are in contact with any
wires.
Mounting Instructions:
1. Confirm power is off.
2. Thread screws (C) into the mounting plate (E).
3. Attach the mounting plate (E) to an electrical box with screws (C).
Make the wire connections:
1. Confirm power is off.
2. Connect the electrical box black wire to the black fixture wire.
3. Connect the electrical box white wire to the white fixture wire.
4. Attach green/yellow grounding wire to the mounting plate with grounding screw (D).
Attach the lamp:
1. Align the holes in the canopy (B) with the 2 screws of the mounting plate (E).
2. Secure the canopy (B) to the mounting plate (E) with finials (A).
5 |