Qaba 370-024 Mode D'emploi page 5

EN
2. Insert the front fork's connection into the
front fork. Lock it with bolts and nuts as
shown in the figure
3. As shown in the figure:
- Insert the front wheel assembly
into the main frame.
- Lift the front hood upward.
- Insert the handlebar tube mouth
into the front fork.
- Use bolt nuts to lock the
handlebar hand and front fork,
and lower the front dome.
IMPORTANT:
The seat cushion is
adjustable.
1 is the front file; 2 is the rear
stop.
The bolt holes indicated by 2
can expand the riding space.
5
4. As shown in the figure:
- Place the saddle onto
the tricycle.
- Position it properly on
the seat fitting.
- Fasten the saddle and
tricycle with bolts and
nuts.
- Lock the seat fitting if
necessary.