Baxall DVS24 Manuel D'installation Et D'utilisation page 9

All manuals and user guides at all-guides.com
To Install the AL8
Firstly, follow the instructions supplied with the AL8, then set the
alarm options on your DVS2
To set the alarm options on the DVS2 ... Remove the power plug
from the back of your DVS2. Press and hold <SPOT> and re-insert
the power plug. Press the numbered keys 1 to 3 to toggle the
options on and off (an asterisk represents on). The options are as
follows:-
Option 1 : start the normal sequence on the main monitor once all
the alarms are cleared.
Option 2 : return the MAIN monitor to its original settings once
all the alarms are cleared.
Option 3 : Sequence the active alarms on the MAIN monitor.
With Options 1 and 2 OFF : your DVS2 holds the last alarmed
camera on the main monitor.
Note: You cannot select both option 1 and option 2 together.
Page 8 English