Tx Mode - Norstone Transmetteur/Récepteur HD Bluetooth Mode D'emploi

GETTING STARTED

2. TX Mode

1. Selecting TX Mode
a) Please turn the TX/RX switch to TX mode before power on NorStone HD Bluetooth
Transmitter / Receiver.
b) In TX Mode, please refer to the picture as shown below. Please connect 3.5 audio line and
optical audio line to the corresponding audio-in jack.
NOTE : In power On mode, if you want to switch TX/RX to TX mode, you need to restart the
NorStone HD Bluetooth Transmitter / Receiver.
19
UK