Lorex Baby SWEET PEEP MAX Mode D'emploi page 13

All manuals and user guides at all-guides.com
When Scan mode is activated, the monitor
changes channel automatically every few
seconds. A Scan icon appears next to the
currently selected channel number.
Currently selected channel
LINK
To connect additional cameras to the monitor, see
"Pairing Additional Cameras" on page 19.
If you wish to only monitor some of your cameras
using Scan mode, you may choose to hide
certain channels. Hidden channels will not be
shown in Scan mode.
To show / hide channels in Scan mode:
1
LINK

C1
Press to cycle through connected cameras to the
channel you wish to show or hide.
By default, each channel name has a checkmark
beside it, which means it is enabled for monitoring
and included in the viewing cycle on Scan mode.
2
LINK
C1
An X will disable video from the channel and
remove it from the viewing cycle in Scan mode.
Scan mode activated
1 Scan
Press to change

a checkmark
and an X
11