Bertazzoni DW24S3IPV Manuel D'installation page 34

USE
2) Height adjustment without load (depending on
model)
In certain models, the height setting of the upper rack
may be changed using the wheels which are present at
two height levels.
CAUTION
Make sure that the rack is empty. Changing
the height setting while the rack contains
tableware could cause the contents to
dislodge, causing
damage to the tableware.
• Release the latches on both the right and left tracks of
the upper rack by turning them outwards, A.
34
Fig. 48
Fig. 49
personal injury or
• Pull out the rack completely, B.
B
• Place the rack into the tracks again at the desired height,
C.
• Push the latches back into the correct position.
A
Fig. 50
Fig. 51
C
Fig. 52