W Box Technologies E-DRSTP700 Mode D'emploi page 10

All manuals and user guides at all-guides.com
Installation Information
1. Remove dome base and use as the drill template. Attach using plugs (A) and screws (B).
2. Once base is firmly drilled into place, re-assemble parts
3. Attach power and video. Connector types can be either type A or B. (Note: Power the
camera from a source of 12 VDC power or use a 12 VDC power adaptor. )
4. Position the camera by using the ring (only requires hand tightening)
5. Verify the IR LEDs are working by covering the photocell of the camera with your thumb.
The IR LEDs will provide a faint red glow. (Note: Do not look directly at IR LEDs for long
periods of time as damage to your eyes can occur.)
10