Télécharger Imprimer la page

Polaroid PiMX922 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Warning and Precautions
9.
A product and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
10.
VENTALATION- Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating and these openings must
not be blocked or covered. The opening should never be blocked by placing the product on a
bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have adhered to.
11.
POWER SOURCES- This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended to operate from
battery or other sources refer to operating instruction.
12.
GROUNDING OR POLARIZING- This product may be equipped with a polarized alternating
current line plug (a plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
Alternative Warning- This product is equipped with a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug only fit into a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
13.
POWER-CORD PROTECTION- Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles and point where they exit from the appliance.
14.
PROTECTIVE ATTACHMENT PLUG- The product is equipped with an attachment plug having
overload protection. This is a safety feature. See instruction Manual for replacement or resetting
of protective device. If replacement of the plug is required be sure the service technician has
used a replacement plug specified by the manufacturer that has used the same overload
protection as the original plug.
15.
Lightning- For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lightning and power-
surges.
16.
POWER LINES- An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact maybe fatal.
17.
OVERLOAD- Do not overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
E-3

Publicité

loading