Disney Mickey Nutcracker Mode D'emploi

1.5 m / 5 ft / 5 pi Disney Mickey Nutcracker with Music and LED Lights
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
● Carefully remove the product and accessories from package. Keep packaging for safe storage.
● Place the product on a flat, stable surface close to a power source. The area surrounding the item should be clear of any obstructions.
● Plug one end of the adapter into the DC jack located at the back of item, and the other end into an electrical outlet.
● The product is operated by the two-way switch at the back of item. Slide the switch to 'I' position to activate lights and music, and turn
the switch to '○' position to turn off product.
● Rotate the dial to adjust the volume of the music.
TROUBLESHOOTING:
If the product is not functioning, check for the following problems:
● The switch is in '○' position.
● The power source is disabled or the cord may be unplugged.
CAUTION:
● When not in use and being packed away, please unplug adapter from DC jack.
● The light source of this luminaire is not replaceable; when the light source reaches its end of life the
whole luminaire shall be replaced.
WARNING:
● This is an electrical product! To avoid risk of fire, burns, personal injury, and electric shock, close
supervision is necessary when the product is used by or near children.
● This is not a toy. For decorative indoor and outdoor use.
● Only adapters of same or equivalent type are recommended.
● This seasonal use product is not intended for permanent installation or use.
● Unplug the product when leaving the house, when retiring for the night, or if left unattended for an extended period.
● Do not use this product for other than its intended use.
● Do not use an extension cord unless the plug can be fully inserted.
● Do not alter or replace the plug.
● When not in use, store neatly in a cool, dry location protected from sunlight.
● Do not connect the chain to the supply while in packaging.
● For decoration purposes only.
● The light source is not intended for use in other applications.
● Read and follow all instructions that are on the product or provided with the product.
● The minimum clearance distance from the top and sides of the control gear to normally flammable building elements is 75mm.
ITM. / ART. 1601376 (US), 1737142 (MX), 151048 (AU)
Product Manual
customerservice@natures-mark.com
1-877-378-3150 (8 a.m. - 5 p.m., PST, Monday - Friday. English only. )