Publicité
Les langues disponibles
Les langues disponibles
Installation Recommendations:
• The PSO1 light fixture should be installed on a flat and stable
surface— the higher the light is placed, the larger the area of
illumination.
• Avoid installing the light near an air conditioner, heater or high-
voltage system, since quick changes in temperature may activate the
motion- detection system and run down the light's power.
• Avoid positioning the motion sensor head towards street traffic, or
where other movements may trigger the light needlessly and drain
the battery.
• The solar panel should be installed facing the sky where direct
sunlight can shine on the panel at least 6-8 hours per day. (Before
initial use, the panel will need 2-3 days of sunlight exposure to fully
charge the battery.)
• The motion sensor is most sensitive to movement across the device
and less sensitive to motion directly towards or away from it.
• Periodically use a soft damp cloth to clean accumulated dust or
snow off of the solar panel. This will preserve the panel's efficiency
when charging the battery.
5
Publicité
