Technical Specifications - MAC Audio PA 1500 Mode D'emploi

36 ENTER (Repeat):
USB/SD operation:
Activates the repeat function: Repeat the album / repeat 1 track / random playback / repeat all
tracks.
37 MODE: You can cycle through the various sources in the following order by repeatedly
pressing the MODE button: USB, SD card and Bluetooth.
38 PICK SONG: No function.
MOUNTING THE SPEAKER ON THE TRIPOD STAND
Important: For safety reasons, the installation of the PA 1500 should be carried out by
2 persons.
1. Put the PA 1500 on its side. Push the stand as far as it will go into the lower round opening.
2. Tighten the nut of the PA 1500 to lock the tripod tube.
3. Adjust the height of the tripod. Secure it with the help of the „Splint" against moving.
4. Slowly bring both the PA 1500 and the tripod into a standing position.

TECHNICAL SPECIFICATIONS

Phone Connectivity
Wireless Bluetooth® 3.0
Operating frequency
Microphone: 212.6 MHz
Bluetooth module: 2402-2480 MHz
Maximum power transmitted acc. EN 62311/EN 62479
Microphone: 0.49 dBm
Bluetooth module: 0.12 dBm
Drivers
380mm/15" woofer, 38mm/1.5" tweeter
VHF wireless microphone
Modulation mode:
Frequency:
Frequency response:
Power supply:
Power consumption:
FM
VHF 212.6 MHz
80 – 18000 Hz (+/- 3 dB), SNR: > 80 dB
2 x 1.5 V (2 x AA battery)
120 mA (+/- 20 mA)
16