Publicité
Les langues disponibles
Les langues disponibles
Protect the device from heat (e.g. from continuous sunlight, proximity to hot stoves or
microwaves), as well as from water and moisture. There is a risk of explosion if the
battery overheats.
Follow the applicable transport instructions for lithium batteries.
Before disposing of the device, inform yourself about the applicable guidelines
regulations and follow them. More information on the disposal of the device can be
found in Chapter 8: Recycling and Disposal.
Disruptive factors:
We recommend operating mobile devices (smartphones, mobile phones or flash drives with
wireless access) at least 1 m away from the testing device due to the inductive eddy current
measurement principle of the GoldScreenSensor. The relatively high radiation density of the
devices can lead to incorrect measurements, which are noticeable in form of strong deviations or
fluctuations in the measurement result. After restarting, the GoldScreenSensor can be used
without any restrictions. WLAN or Bluetooth wireless connections do not affect the
measurements and can be operated without hesitation.
Conformity:
The GoldScreenSensor from Goldanalytix complies with the relevant European Directives
regarding health, safety and environmental protection.
3
Scope of Supply
Your GoldScreenSensor set includes the following components:
Before initial start-up, please check that the components mentioned above are included in the
scope of delivery of the GoldScreenSensor set and that there is no obvious transport damage. In
case of any defects, please contact Goldanalytix immediately (for contact details, see page 26).
GoldScreenSensor
Charger
Copper calibration piece
Instruction manual
Carrying case with inlay
Shipping carton
19
Publicité
