Base Grille - Heartland Appliances HL-P36FD-SS Guide D'utilisation Et D'entretien

5. Using an adjustable wrench, hold the nut on the plastic water
line to keep it from moving. Then, with a second wrench turn
the compression nut on the copper tubing counterclockwise
to completely tighten. Do not overtighten.
A. Plastic water line
B. Water valve inlet port
C. Compression nut
6. Check connection by pulling on copper tubing. Attach copper
tubing to refrigerator cabinet with a "P " clamp. Turn on water
supply to refrigerator and check for leaks. Correct any leaks.
Complete the Installation
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
1. Plug into a grounded 3 prong outlet.
NOTE:

Base Grille

Remove the Base Grill e
1. Grasp the grille with both hands.
2. Pull the grille toward you.
A
B
C
D
E
D. Copper tubing
E. "P" clamp

Replace the Base Grille
1. See the markings on the inside of the base grille for proper
placement.
2. Align the grille mounting clips with the cabinet slots.
3.
place.