HURAKAN HKN-ISH3 Mode D'emploi page 7

No. DESCRIPTION
1 Main body
2 Rubber feet
3 Handle
4 High speed regulator
5 Low speed regulator
6 Main drive
7 Bearing 1
8 Drive casing with mounting kit
9 Bearing 2
10 Bearing 3
11 Drive casing cover with mounting kit
12 Plunger rod
13 Spring
14 Pressure relief valve
15 Plunger
16 Plunger gasket
APPLICATION
1. Wash the parts that come into direct contact with food, install the funnel and connect
it to the body.
2. Turn the high speed knob clockwise until the plunger comes out of the container.
3. Remove the container and fill it with product; insert the container into place.
4. Install the low speed knob and turn it clockwise until the plunger enters the container.
5. Turn the knob to until the product takes the form of a sausage; repeat continuously
until you use the entire product.
6. Go back to step 2.
REPAIR AND CARE
1. After use, remove the canister and plunger and rinse thoroughly.
2. Wipe the body with a cloth.
Before and during operation, lubricate the drive cradle, high speed and low speed regulators,
and guide rail two times.
All manuals and user guides at all-guides.com
No.
17 Stainless steel container
18 Front retainer nut
19 Stainless steel funnel set
B1 Cap nut
B2 Washer S
B3 Washer C
B4 Lacing screw
B5 Screw
B6 Washer S
B7 Washer C
B8 Lacing screw
B9 Locking washer
B10 Flat key
B11 Lacing screw
B12 Cap nut
DESCRIPTION
EN
7