Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
SHOVELUTION
ASSEMBLY INSTRUCTIONS
A Division of Snow Joe
HANDLE IS SPRING LOADED UNDER HEAVY TENSION.
To avoid injury, securely grasp handle before cutting zip ties.
Then, remove retaining strap and save for later storage.
TO ASSEMBLE:
1. Depress the small button at the end of
the lower pole, push and insert the lower
pole into the poly blade unit until it snaps
securely into place.
2. Remove the knob and the bolt from the
upper pole.
3. Insert the top of the lower pole into the
upper pole.
4. Align bolt holes, insert the bolt into the
square hole, through pole.
5. Tighten with the knob.
TO DISASSEMBLE:
Follow instructions above in reverse order.
FOR STORAGE:
Make a loop with the retaining strap around the spring-loaded
handle, and with the other end, secure to knob on the upper pole.
NOTE: If you have further questions, please contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563).
All manuals and user guides at all-guides.com
TM
Model SJ-SHLV02
, LLC
®
m
18" CLEAR SNOW SHOVEL
CAUTION!
poly blade
© 2018 by Snow Joe
All rights reserved. Original instructions.
upper
pole
knob
lower
pole
unit
+ Sun Joe
®
R
, LLC
®
bolt
customer
®
Publicité
Sommaire des Matières pour SNOWJOE SHOVELUTION SJ-SHLV02
- Page 1 Make a loop with the retaining strap around the spring-loaded handle, and with the other end, secure to knob on the upper pole. NOTE: If you have further questions, please contact the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563).
- Page 2 à ressort et attachez l’autre extrémité au bouton sur le manche supérieur. REMARQUE : si vous avez la moindre question, veuillez communiquer avec le service clientèle Snow Joe + Sun Joe au 1-866-SNOWJOE (1-866-766-9563). ® ®...