Getting Started
4
When the bowl and attachment are in place, raise the bowl arms by slowly pushing up on arms until
they lock into place. Slide the bowl shield onto the bowl if desired.
5
Plug the mixer into an outlet.
7
Pull down on the quick change to
release your attachment.
Attachment
output shaft
NOTE: Refer to the full Owner's Manual for a complete overview of functions.
GE is a trademark of the General Electric Company. Manufactured under trademark license.
Bowl support in locked position
Ready
6
Use the speed dial and turn to your desired
speed. When finished, turn back to the off
position.
Ready
Image shows
the control
knob in OFF
position
49-9000048 Rev. 0 08-22 GEA