nordlux Smart Djay Configuration Et Utilisation

Setup - Nordlux Smart Djay
1
Download
Download the Nordlux Smart app
from the App Store or Google Play.
4
Add
1. Tap "Add".
2. Choose the device and tap "Next".
3. Add device to room or skip this step.
7
To use Smart Djay as a speaker, tap the speaker icon.
When using the feature "Disco mode", the light
flashes to the sounds picked up by the microphone
of the phone.
2
5 m
*
ON
Turn on Bluetooth on your device.
Distance to Smart Djay is up to 5 meters.
*Remember to turn on the lamp.
5
Finished
Device is now being connected. Tap "Finished".
If the device is not connected successfully,
please tap the "!" for further information.
8
Cancel OK
Tap "OK". The speaker is automatically connected.
A short sound plays when the pairing is complete.
3
ON
Open the Nordlux Smart Djay app and tap the plus icon in
the top right corner or "Add device".
6
Tap the Smart Djay on the home screen under
"Your devices" to control your Smart Djay.
When experiencing connection issues, a common solution
is to reset the lamp. This can be done by turning the lamp
on and off 4 times, until it starts to flash – then the reset
is complete.
Add device
Smart Djay
My Home
ON/OFF
https://www.nordlux.com/smart/help/setup/