Publicité
Les langues disponibles
Les langues disponibles
Description
LEDs indicating
the Mobile network
selected
Power socket
3G 4G
Power LED SIM holder
FRONT VIEW
IMPORTANT: Connection to internet via a mobile operator network is operational when the 4G LED (or 3G LED if 4G
is not available) is On. If the 4G or 3G LED is flashing, the connection to the mobile network has failed. See Note 4.
1. SIM card installation
WIRELESS
1
4
2
3
2. Connection via Wi-Fi
• To connect to the router via a smartphone, scan the QR code
• To connect to the router via a computer:
1) select the Wi-Fi network INET_151_XXXX.
2) enter the 8 characters «password» written on the front of the router.
Mobile signal strength
indication LEDs
LAN LED
WAN LED
1. Press the button on the SIM holder with the SIM needle provided.
MAIN
AUX
2. Remove the SIM holder.
3. Insert your SIM card into the SIM holder. Use one of the adapters
(provided) if needed.
4. Insert the SIM holder into the router.
5. Attach the Mobile and Wi-Fi antennas. If supplied, prefer I-NET outdoor
antenna to indoor stick antennas.
6. Connect the power cord to the jack on the front of the router, cube
socket side :
- Connect the black wire (-) to ground.
- Connect the red wire (+) to the plus terminal of the battery. The + wire
must be protected by a 3A fuse.
Note: Do not connect the green and white wires.
7. Connect to the device's Wi-Fi network SSID by scanning the QR code with
a smartphone or using the info to the front of the device. For configuration
with a PC, prefer the Ethernet cable to connect to the LAN interface.
3G 4G
WiFi antenna
connectors
WIRELESS
or
present on the front of the router.
EN
Mobile MAIN
antenna
connector
MAIN
Reset button
Mobile AUX
(view Note 1)
antenna
connector
BACK VIEW
(voir Note 2)
AUX
Publicité
