Publicité
FOR PLAYSTATION
®
3
Thank you for purchasing this Brooklyn
and acquaint yourself with the individual functions before using your device.
Package includes:
• 1x Wireless Controller for PlayStation
• 1x USB-receiver
• 1x Instruction manual
Preparation
Please take the wireless controller and the USB receiver out of the
packaging. Open the battery compartment, insert 3x AAA battery and
close it again.
Start up
1. Insert the USB-receiver into a free USB-port and switch on your
PlayStation
3-console. (Receiver LED is fl ashing fast)
®
2. Switch on the POWER button
(Receiver LED light constant)
3. Press the PS-button
on the Wireless Controller.
2
4. The synchronization is successful when one of the four Contoller
LEDs
light.
3
Battery savemode
The Wireless Controller comes with a battery savemode.
If the controller hasn´t touched for around 5 minutes, it will switch off automatically.
To reactivate the Wireless Controller press the PS-Key.
Troubleshooting:
Problem:
The Wireless Controller doesn´t work!
Solution:
Press the PS-key
Problem:
The Wireless Controller does not vibrate!
Solution:
Please make sure the used game supports vibration function. Also make sure that vibration is
activated inside the game-menu. Furthermore the POWER switch
Problem:
I cannot use the Motion Sensor (6Axis) technique!
Solution:
Please note the wireless controller offers no Motion Sensor (6Axis) technique.
The manufacturer guarantees this product for 60 months. Please keep your receipt in a safe place.
Customer service:
VIDIS GmbH • Rungedamm 37
D-21035 Hamburg • Germany
product. Please read the operation manual thoroughly
TM
3
®
at the bottom of the controller.
1
2
and make sure the battery has still enough capacity.
2
Tel.:
+49-40-514840-48
Fax:
+49-40-514840-40
E-Mail:
service@vidis.com
Internet: www.vidis.com
PS3 Wireless Controller
MOTOR
4
OFF ON
3
SELECT
need to be set to ON.
4
POWER
1
OFF ON
START
2
MENU
2
Publicité
