Wetekom 84 25 80 Manuel D'instructions page 31

Charging an external mobile Device
1. Connect the external mobile device (cell phone, tablet PC,
etc.) with the 5 V output (3) of the battery charger.
2. Connect the USB connection cable (11) with the 5 V input (4)
of the battery charger and with the 5 V output (8) of the power
supply. Plug the power supply into a mains socket. The control
LED (9) lights up.
3. Alternatively you can use the USB cable (11) to connect the
battery charger to a free USB interface of your PC.
4. The LEDs (2) and (6) briefly light up in red and green and turn
off then.
5. Charging of the external mobile device starts. Pay attention to
the notes and instructions concerning the charging process
provided by the supplier of the mobile device.
6. After charging, unplug the power supply or disconnect the
battery charger from the USB cable.
Note: If no batteries are to be charged at the same time, the
external mobile device (cell phone, tablet PC, etc.) can be
directly connected via the USB connection cable (11) to 5 V
output (8) of the power supply.
Cleaning and Storing
 Before cleaning or maintaining always first unplug the power
supply.
 Do not wipe the unit with sharp detergents or aggressive
chemicals in order not to damage the surfaces.
 Keep the electric charging contacts in the charging slots clean
at all times to ensure proper functionality.
 Store the battery charger indoors in a place that is protected
from humidity, dust, dirt and extreme temperatures.
 Store the unit out of reach of children.
All manuals and user guides at all-guides.com
Operation
27