Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Door bell with photosensor
Item no. 1707620
Intended use
This door bell monitors doors or rooms in houses, stores, offices, hotel rooms, etc. It is powered
by four 1.5 V AA batteries or via a mains unit (6 V/DC, 300 mA).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Door bell
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
All manuals and user guides at all-guides.com
Operating elements
1
1 (LED) status display
2 Sensor
3 DC socket for external voltage supply ø 5.5/2.1 mm
4 Sliding switch
5 Wall mounting hook
6 Battery compartment
Operation
a) Inserting the batteries
• Move the battery compartment cover in the direction indicated by the arrow by applying light
• Insert 4 new type AA batteries into the battery compartment (6). Observe the correct polarity
• Reattach the battery compartment cover and lock the battery compartment. The cover must
b) Installation
• Set up the door bell on a shelf or hang it to a wall e.g., to an already existing wall hook!
c) Operation
• Activate the door bell by setting the sliding switch to position "Vol.LOW" or "Vol.HIGH".
• After a warm-up phase of approx. 10 seconds, the door bell sounds as soon as the sensor
• Set the sliding switch to position "OFF" to deactivate the door bell!
Care and cleaning
• Except for an occasional battery change, this product requires practically no maintenance.
• Use a clean, dry, lint-free cloth to clean the product. To prevent scratch marks, do not apply
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
b) Batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries in
the device can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
2
For non-stop operation we recommend using an external mains unit (e.g. item no.
512834) instead of batteries for voltage supply!
pressure.
while doing so ("+" = positive; "-" = negative).
audibly lock into place.
Follow the same steps to replace the battery. Replace the battery at least once a
year.
Make certain when drilling and tightening the screws that no cables or pipes are
damaged. Inadvertently drilling through electric cables causes the life-threatening
danger of an electric shock!
detects a movement within its range (0° approx. 5m to the front). Subsequently, the door bell
switches off automatically and is ready again.
The sensor does not detect movements in absolute darkness. To work properly
it requires a minimum illumination of 0.3 lux. Furthermore, you must avoid direct
sunlight or powerful illumination!
too much force on the surface during cleaning. Dust can easily be removed using a clean,
soft brush and a vacuum cleaner.
they can cause damage to the housing and malfunctioning.
6
3
4
battery compartment cover
lid of the battery compartment
5
Publicité
