Vax X5 Manuel Du Propriétaire page 7

TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
1.
Pull cleaning wand to the front
of the cleaner and press hose
into handle assembly.
4.
Using a Phillips or Flat Head screwdriver,
secure the handle by inserting the
provided four screws into the back of
the handle.
6
All manuals and user guides at all-guides.com
2.
Insert excess cord into handle of the
cleaner by pushing down into lower
handle. CAUTION: AVOID PINCHING
CORD WHILE INSERTING INTO
HANDLE.
5.
Connect the cleaning wand to
the opening on the base and push
the wand handle towards unit
until it snaps into place.
3.
Align handle onto base of cleaner.
TRANSPORTING
YOUR CLEANER
1.
NOTE: Do not
carry vacuum
cleaner by the
cleaning wand
tube.This is not
a carry handle.
Use carry handle located on dirt
container lid.