Costway ES10254 Mode D'emploi page 4

PARTS INTRODUCTION
NO. PART NAME
1 On/Off Button & Timer Button
2 Indicator Light
3 Time Indicator
4 Child Safety Lock
5 Handle
6 Lid
7 Fragrant Disc Holder
8 Liquid Crystal Display Screen
9 Power Cord
5
4
1
2
3
For the safety of your children, please turn on the child lock when
using it. Turn left to open, turn right to lock. Double check if it is
locked again when heating up, Keep the towel warmer away from
your kids, children or baby.
06
7
6
8
9
SETTING UP
1. Open the Lid and remove any packaging contents.
2. Place the Towel Warmer on a dry, level, hard surface.
3. Insert Plug into a standard 120 V outlet.
FUNCTION BRIEF
1. Button Control
Power Button - Short press to tum on or off.
Timer Button - Short press to switch to 15-30-45-60 minutes, the
default timing of heating is 15 minutes.
2. Preheating Status Indication
3. After you turn on the power button, and when the temperature is
lower than 140℉, the LED indicator will flash; When the tempera-
ture is above 140℉, the LED indicator light will stay red, which
means the interior surface is too hot and unsafe to touch.
4. Heating Time Control
Press the Power Button, the towel warmer will start to heat up. You
can control the timing of heat for 15/30/45/60mins pressing the timer
button. The default time of heat is 15 minutes. At this mode, the
temperature inside will rise up to 268℉ in 7 minutes, and keep at
about 200℉-248℉ within 15 minutes. After the timer expires,
please turn off the towel warmer.
When the timing mode is at 30/45/60 minutes, after 15-minute
heating, the towel warmer will enter into the heat preservation state
and the temperature will be kept at 200℉-248℉ until the timer
expires.
5. Heating Time Display
When you set up a heating time, the liquid crystal display will show
a countdown to the corresponding heating time. After the timer
expires, the heating stops and the time displays 00; After the time
shows 00, the LED will be automatically turned off after 30 minutes
to save power;
07