Monster PerfectView 450M FlatScreen PowerMount Guide D'utilisateur page 36

Routing and Connecting Your AV Cable
1) Fully extend the mount's Z-Fold
and swivel the TV left or right. Ensure you have
suffi cient cable.
2)
Remove the end cap from the Power Mount's
top swing arm. Next, slide off the top arm's cable
management cover. Unscrew the cover on the mount's
second arm using a Phillips screwdriver.
3)
Route AV cable from your wall, set-top box, AV receiver
or other source through the top channel and second
arm, as shown.
4) Slide the cable channel cover back into place. Screw
on the second arms cover. Replace the end cap.
Congratulations!
You've successfully installed your PerfectView
450M FlatScreen Mount.
Visit www.MonsterCable.com/FlatScreen for more
innovative Monster FlatScreen products, including our
ultra low-profi le FlatScreen Cable and our safe, FlatScreen
Clean LCD and plasma cleaning solution for preserving
your fl atscreen display.
32
swing arms
™