Num'axes VIS1053 Guide D'utilisation page 10

9. Maintenance
Lenses
− Do not wipe the lens to remove loose or debris, but gently blow it away or use a soft
lens brush instead.
− Fingerprints may affect the lens surfaces after some time. The easiest way to clean the
lens surface is to breathe on them and lightly wipe them using a clean optics-cleaning
cloth.
− Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and
eventually cause permanent damage.
− Do not use a velvet cloth or ordinary tissue, as it may scratch the lens surface.
− A cloth that has been used for cleaning the body of the product should not be used on
the lens surface.
− For a more thorough cleaning, camera lens cleaning wipes may be used.
Main body
− Clean the body surface with a soft clean cloth. Do not use benzene, thinner, or any
other cleaners containing organic solvents.
Storage
− Water condensation or mold may occur on the lens surface due to high humidity. Avoid
this by storing the monocular in a cool, dry place. After use on a rainy day or at night,
allow the product to dry completely at room temperature before storing it in a cool,
dry place.
10. Troubleshooting
Should your product stop working or develop a fault, first read this guide over, and then check
the battery and replace it if necessary. Also make sure that you are using the product
correctly.
If the problem persists, contact your distributor or check out on www.numaxes.com.
You can also contact NUM'AXES at +33.2.38.69.96.27 or by email export@numaxes.com.
Depending on the extent of the malfunction, you may have to return the product for service
and repair.
For all repairs, please supply the following:
− the complete product
− the proof of purchase (invoice or sales receipt)
If you omit one of these items, the after sales service will have to invoice you for any repair
costs incurred.
VIS1053 - Indice A – Août 2020 10/30