Kiwi kht-8417 Mode D'emploi page 5

All manuals and user guides at all-guides.com
USE
Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the
device matches the local voltage before connecting the device. Voltage 220V-240V 50Hz).
Thermostat knob
• To set the required room temperature: turn the knob to the right as far as it will go and wait
until the required temperature has been reached. Turn the knob then slowly back again until
the control lamp has been extinguished. The position of the knob now corresponds to the
required temperature.
• NOTE: for ventilation only you also have to turn the thermostat knob to your required
temperature.
Function button
Use the function button to choose the your desired setting, you can choose between:
• Off
• Only ventilation
• Low heat output
• High heat output
Oscillation knob
Use to turn on the oscilation funtion.
CLEANING AND MAINTENANCE
• Unplug the appliance and allow it to cool down. Use a soft, slightly damp cloth to wipe
appliance surfaces. Do not allow water or any other liquid to get into the unit.
• Do not immerse the appliance in water or any other liquid.
• Clean the air suction opening from time to time with a fine brush.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be
offered at a central point for the recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute
an important push to the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
KHT 8417 Instruction Manual
5