Publicité
4
ECOMAT – English
NR. 1: MAIN SWITCH (RED)
PRESS THIS SWITCH TO BRING THE APPLIANCE INTO OPERATION. THE RED LIGHT LIGHTS UP WHEN THE
APPLIANCE IS SWITCHED ON.
NR. 2: POWER - ROCKER SWITCH WITH POS. 450 W / 750 W / MAX
USE THIS 3-POSITION ROCKER SWITCH WHICH ALSO SERVES AS AN ECONOMY CIRCUIT TO SELECT THE
POWER AND LOWEST FUSE PROTECTION OF 2 AMPERES.
THE FUNCTION IS AS FOLLOWS:
450 WATTS / 2 AMP. FUSE PROTECTION FOR EXTREMELY SMALL FUSES AND LOW HEATING
REQUIREMENT, ALSO SERVES AS ECONOMY CIRCUIT.
750 WATTS / 4 AMP. FUSE PROTECTION THIS POSITION CAN ALSO BE SELECTED WITH VERY
SMALL FUSES AND ALSO SERVES AS AN ECONOMY CIRCUIT.
MAX 1500/1800 WATTS / 6 – 10 AMP. FUSE PROTECTION MOVE THE SWITCH TO THIS POSITION
TO SELECT MAXIMUM HEATING POWER DEPENDING ON THE HEATING REQUIREMENT, OR TO
HEAT QUICKLY. THE FAN RUNS AT HIGH SPEED. ONCE THE TEMPERATURE HAS BEEN REACHED,
NR. 3: THERMOSTAT - ROTARY KNOB
YOU CAN VARY THE ROOM TEMPERATURE INFINITELY ACCORDING TO THE TEMPERATURE SCALE VIA
THE THERMOSTAT.
THE FUNCTION IS AS FOLLOWS:
SELECT THE ICE CRYSTAL SYMBOL TO SET A FROST PROTECTION TEMPERATURE OF 5 DEGREES
CELSIUS. THE APPLIANCE CAN BE OPERATED CONTINUOUSLY DURING THE PERIOD OF FROST.
YOU CAN SELECT THE VENTILATION SYMBOL TO ACTIVATE A FRESH AIR FAN WHICH DELIVERS
PLEASANT REFRESHING AIR.
SELECT A COMFORTABLE TEMPERATURE FOR YOU ACCORDING TO THE TEMPERATURE SCALE,
THIS WILL BE REGULATED AUTOMATICALLY.
Anleitung Ecomat_ClassicPlus.indd 4
15.05.12 12:32
Publicité
