Tripp-Lite SRCOOLNET2LX Guide D'installation Et De Démarrage Rapide page 4

Installation
4 - Static IP Address Assignment/Terminal Menu
Configuration Settings
Determine IP Information: The SRCOOLNET2LX can support a single static IPv4
4-1
address (requires setting the IP address, subnet mask and gateway) and/or a
single static IPv6 address. In addition, the SRCOOLNET2LX can support a single
static IPv4 or an IPv6 DNS address that is required to be entered.
Configure Terminal Emulation Program: If you have not already done so,
4-2
download the serial over USB driver (TL-cdc) from the Tripp Lite website. The
driver can be found by going to www.tripplite.com/support and typing
SRCOOLNET2LX in the search field. To install the driver, follow the instructions
provided. Once the driver is installed and a COM port has been assigned, set
your terminal emulation program to use the COM port that corresponds to the
USB port.
Figure 1
SRCOOLNET2LX
SRCOOL2KWM SRCOOL7KRM
Connect SRCOOLNET2LX to Computer: Using the provided cable, connect your
4-3
PC to the Micro-USB port on the SRCOOLNET2LX.
18-06-379-93387E.indb 4
All manuals and user guides at all-guides.com
SRCOOL18K / SRCOOL24K
4
SRCOOL33K
COMPUTER
WITH USB PORT
7/26/2018 4:19:59 PM