Publicité
Les langues disponibles
Les langues disponibles
The TURBO button can also be used for instant power pulses
without having to set the speed.
Attention: do not activate the stick mixer constantly, this can
cause engine problems. Do not use the stick mixer for more
then one minute continuously, wait until the engine is cooled
down in three minutes before operating it again. Blend larger
quantities in multiples sessions.
The stick mixer can't exceed a running time of 15 seconds
without a load.
Always unplug the appliance from the supply if it is left
unattended and before assembling, disassembling and during
cleaning.
You can use the stick mixer in the measuring cup and also
in another bowl. When blending directly in a saucepan while
cooking, take the pan from the stove first to protect the
appliance from overheating.
The anti-slip base is also an airtight lid for the measuring cup.
5
using the whisk
Use the whisk for example for making whipped cream or beating
egg whites.
• Take the motor part, the connector and the
whisk.
• Attach the connector to the whisk.
• Attach the whisk to the motor part by turning
the connector clockwise.
• Check whether the speed control is set on the
lowest speed - to the right. You will get the best
result.
• Plug in the appliance.
• Place the ingredients in the measuring cup.
Make sure the measuring cup is not too full.
• Place the whisk in the measuring cup.
• Press the ON button to use the speed setting
you have set on top of the motor part.
• As soon as you release the button (on or turbo),
the whisk will stop.
Always unplug the appliance from the supply
if it is left unattended and before assembling,
disassembling and during cleaning.
To remove the whisk after use, turn it anti
clockwise from the motor part and pull the whisk
from the connector.
12
•
English
6
using the chopper
Warning: the blades of the chopper are extremely
sharp. Be careful while assembling, emptying the
chopper bowl and cleaning.
The chopper is suited for chopping meat, cheese, onions, herbs,
garlic, carrots, nuts, etc.
Attention: do not chop any hard ingredients such as ice cubes.
• Place the chopper bowl on a flat surface.
• Place the knife on the axle in the centre of the bowl. Pay
attention - the knives are extremely sharp.
• Place the ingredients in the bowl.
• Place the lid.
• Take the motor part and attach it by turning it clockwise onto
the lid of the chopper.
• Check whether the speed control is set on the lowest speed -
to the right.
• Plug in the appliance.
• Press the TURBO button for maximum speed or press the
ON button to use the speed setting you can set on top of the
motor part.
• During processing, hold the motor part with one hand and the
chopper bowl with the other hand.
Attention: do not activate the chopper constantly, this can
cause engine problems. Do not use the chopper for more
then one minute continuously, wait two minutes before you
operate it again.
• As soon as you release the button (on or turbo), the chopper
will stop. Wait until the knife stops rotating before you take
the lid of.
The TURBO button can also be used for instant power pulses
without having to set the speed.
Always unplug the appliance from the supply if it is left
unattended and before assembling, disassembling and during
cleaning.
To remove the motor part after use, turn it anti clockwise from
the lid.
The anti-slip base is also an airtight lid for the chopper.
Publicité
