Chattanooga Group Intelect TENS Manuel D'instructions page 15

All manuals and user guides at all-guides.com
13. Using Burst Mode. When operating in Burst mode, your TENS
produces a series of seven quick pulses followed by a rest.
The cycle repeats itself twice every second. Before
switching to Burst, turn amplitude controls for channels 1
and 2 to "O" (off). Choose "B" (burst mode) with the mode
selector switch. Slowly adjust the amplitude and pulse width
controls to the setting recommended by your medical
professional. Note: In burst mode, the pulse frequency is
fixed; adjusting the pulse frequency control has no effect.
14. Using Modulation Mode. When operating in Modulation Mode,
your TENS unit automatically varies the amplitude of the
pulse every four seconds. To use Modulation, first adjust the
amplitude controls for channels 1 and 2 to "O" (off). Set the
mode selector switch to "M" (modulation) position. Slowly
adjust channel 1 and/or channel 2 amplitude, pulse
frequency and pulse width controls to the settings
recommended by your medical professional.
Timer (min)
13
30
60
C
Timer (min)
14
30 60
C
11