Mobileye C2-270 Guide De Référence page 6

Headway Monitoring and Warning (HMW)
hmW displays your headway relevant to the vehicle in front of you.
WHAT IS HMW?
if you get closer than a pre-defined value, it alerts you to the danger.
HMW AUDIO ALERT
You hear a single chime when headway is defined unsafe.
the green car icon is displayed from the moment a vehicle is detected,
HMW
Notice
and as long as the headway is above 0.6 seconds.
VISUAL
ALERT
the car icon changes to red when the headway is less than 0.6 seconds.
WARNING!
You will see the visual alert whenever a vehicle traveling in front of you
WHEN IS HMW
is detected. the numerical headway display and the audio alert are
FUNCTIONAL?
operational only at speeds greater than 30 km/h (19 mph).
You will see – in seconds – the headway to the vehicle in front of you
THE DISTANCE
METER (distance is measured in "headway seconds").
VISUAL ALERTS
HMW WILL NOT ISSUE AUDIO WARNINGS WHEN:
Intelligent High-beam Control (IHC)
the ihc assists the driver in controlling the vehicles high beams and
WHAT IS IHC?
increases their correct use by automatically switching from low beams to
high beams when no traffic is in close proximity to your vehicle on dark road.
WHEN IS IHC the ihc is active at night when no traffic is in close proximity to your
FUNCTIONAL?
vehicle on dark roads.
IHC WILL NOT
l
SWITCH TO HIGH
BEAMS WHEN
l
l
1. this feature is available only on certain mobileye c2-270 modules
IMPORTANT NOTE
2. this feature is available only if activated during the system installation.
3. this feature is available only in certain geographical areas.
All manuals and user guides at all-guides.com
Notice
Whenever tail lights are recognized in front of the host vehicle up to
a distance of 400m and can track the vehicle to well beyond this range.
Whenever there is an oncoming vehicle up to a distance of 800m.
Whenever the host vehicle enters a well lit (urban) area or when street
lights are detected.
WARNING!
the system has been muted.