Publicité
Attach height actuator
5
Secure the actuator to the worksurface in your desired location using the #8x38mm (4) screws
provided. Refer to the hole locations below.
Attach cable clip
6
Secure the cable clip using the #6x16mm screw provided. Hole location shown below .
(Base not visible) (1 extra cable clip and screw included)
For left handed actuation
Adjustments
7
Flip the table right side up. Adjust the 3 glides to level the table. It is now ready to use.
All manuals and user guides at all-guides.com
Screw location
For right handed actuation
For left handed actuation
For right handed actuation
5
Publicité
