MOTION BLINDS CM-13 Manuel page 12

Single select 15 channel remote
5
To activate
5.1
Single select,
simultaneously
hold the center
button and press
the pair button.
12
5.2
11
+
5. SINGLE SELECT 15 CHANNEL REMOTE
Single select makes it possible to activate program mode on
a single blind through a remote control, without having to
physically press the program button on the blind.
The remote starts
1
searching for
blinds (search
mode). This is
indicated by the
horizontal bars on
the remote.
Once a blind is found,
5.3
1 1
the channel number
will flash and the
blind starts stepping,
indicating that program
mode has been
activated. The blind
can now be (un)paired
with the remote and/or
programmed.
1