Herth+Buss BDS-2 Mode D'emploi page 4

Fitting Instructions
EN
IMPORTANT
Before starting off, the driver is
obliged to check operation of the
BDS-2 (pre-departure check - c.f. §23
German Road Traffic Act StVO)
Keep for later reference
The latest version of the Operating/
Fitting instructions is also available
in our online catalogue:
herthundbuss.com/online catalogue
www.herthundbuss.com
82710490 + 82710470
Technical data:
6
Fitting Instructions
Marker lamp BDS – 2
Install the marker lamp with a clearance of
approx. 60-80 cm to the ground. In addition,
the marker lamp should have a clearance of
approx. 10 cm to the truck or trailer on both
sides and approx. 5 cm to the rear of the
vehicle.
10 cm
7
82710490 + 82710470
5 cm
EN