Power Fist 8043501 Guide De L'utilisateur page 2

Features
The jump start kit is a portable 15 pound battery booster suitable for
boats, cars and generators. It is fully compatible with any 12 volt starting
system. The portable jump start kit uses a maintenance-free sealed
battery, and can be stored conveniently in any position without fearing
leaks.
Specifications
1. Battery: 12V/15 AH
2. Booster cable: 6 AWG /20inch
3. Starting power: 300A
4. Output voltage: 12 VDC
5. Output from cigarette lighter socket: 12 VDC, <15A
6. Charging:12VDC/500mA
Operation Instructions
Starting Engines:
1. Connect the red clamp to the positive post (+) of the battery, then the
black clamp to the chassis or engine bolt.
2. Switch the ignition to "start."
3. Once the engine is running, disconnect the clamps and restore them to
their storage position.
Charging:
Plug in the adapter to an electrical outlet, and the jack into the charging
socket in the front panel on the jump start kit. A red "charging" LED will
light up to indicate the jump start kit is charging. When the battery is
fully charged, it will stop charging automatically and this LED will turn
off.
Checking the battery:
Press on the red "push" button to check the internal battery status.
Illumination of all 3 LED lights means the internal battery is fully
charged. If only the red LED is lit, the jump start kit needs to be
recharged.
All manuals and user guides at all-guides.com